Fortex Max

TECHNICAL CHARACTERISTICS

Nominal Density 1.15 ±0,10 g/cm3
Velocity of Detonation*
(without confinement)
> 4500 m/sec
Explosion Energy > 3,05 MJ/kg
Gas Volume more than 900 Lt/kg
RWS [ANFO = 100] 112
RBS [ANFO=0.85 g/cm³] 148
Self life 12 months

* The velocity of detonation will depend on application, diameter and confinement
* Shot distance (38mm diameter plastic cartridge)
** All values can show ± %3 variance

  • GENERAL INFORMATION

    Fortex Max is a cap sensitive emulsion explosive with a diameter range of 28mm to 38 mm with formulation for excellent fragmentation for underground blasting applications except for atmospheres containing underground gases such as methane. Thanks to its high energy and detonation velocity, it offers perfect solutions in all types of rock formations. Fortex MAX, which is waterproof, shows successful results both in dry and wet holes. It contains aluminum to enhance heave. Fortex Max can be used as a replacement for dynamites in tunneling.

  • CLASSIFICATION AND TRANSPORT
    UN 0241  
    Hazard 1.1D According to Regulation (EC) No. 1272/2008 {CPL}
    Explosive Type E  
  • APPROVALS

    Vagexco Sh.p.k. has integrated Quality Management System according to ISO 9001:2015 standard.

  • STORAGE CONDITIONS

    Store this product in a suitably licensed magazine for class 1.1D explosives. The cases should be stacked in the manner designated on the cases. Product has a storage life up to 12 months in an approved magazine.

  • DISPOSAL

    Disposal of explosives materials can be hazardous. Methods for safe disposal of explosives may vary depending on the user’s situation. Please contact a local Vagexco representative for information on safe practices.

    Packaging
    Cartridge Diameter (mm) 28 32 38
    Cartridge Length (mm) 305-310 430-440 400-410
    Cartridge Weight (g) 210 400 500
    Cartridges in box 95 50 40
    Box Weight (kg) 20 20 20

    ± %3 Tolerance

RECOMMENDATIONS
FOR THE USE OF THE PRODUCT

  • USAGE ADVANTAGES

    - Fortex Max delivers excellent fragmentation in all kinds of blasting operations thanks to it special formulation.

    - Excellent water resistance.

    - Less downtime and less loss of work, especially in underground operations, thanks to low gas emission.

    - Lower labor costs due to ease of transport and hole loading.

    - Fortex Max is used for all underground blast applications as a booster or the main charge.

  • USAGE SUGGESTIONS

    - It can be used safely in harsh field conditions, in the range of -20/+40°C.

    - It should be used together with Electric Detonator (No:8 strength), Non-Electric Detonator, Electronic Detonator or Detonating Cord (10 gr/m and above).

    - Impact should never be applied with a metal stemming bar inside the hole. If necessary, it should be inserted into the hole using a wooden stemming bar, avoiding any impact.

    - It is not recommended for use on reactive grounds or when the ground temperature exceeds 40°C.

SEE ALSO

Fortex-700

Fortex-700

Booster Sensitive Explosive

Fortex-700 is a booster sensitive explosive delivered from mixing Anfo with emulsion, and it can be used safely in all types of blasting operations.

MORE ABOUT THIS PRODUCT
FORTEX

FORTEX

Cap Sensitive Emulsion Explosive

Fortex is a cap sensitive emulsion explosive with a diameter range of 50mm to 90 mm with formulation for strong detonation wave and high energy.

MORE ABOUT THIS PRODUCT
ANFO EXAL

ANFO EXAL

Explosives Blasting, Type B - UN 0082

ANFO EXAL is a balanced mixture of prilled porous ammonium nitrate and fuel oil (at ratio 94,3% AN, 5,7 FO).

MORE ABOUT THIS PRODUCT