| Net Explosive Content per 100 units | 0.0240 kg |
| Delay Time (msec) | Connector Block Color |
| 9 | Green |
| 17 | Yellow |
| 25 | Red |
| 42 | White |
| 67 | Blue |
| 100 | Black |
| 109 | Black |
| Hazardous Shipping Description | Detonator assemblies nonelectric, 1.4B, UN 0361 PG II |
NONEL nonelectric delay detonator EZTL units consist of a length of yellow shock tube, with a surface detonator attached to one end and the other end sealed. The detonator is housed in a plastic EZ Connector block which facilitates easy connection to shock tube. A white J-hook is affixed near the sealed end. Easyto- read, color-coded delay tags display the delay number and nominal firing time prominently.
EZTL detonators are designed for use with NONEL MS and EZ DET® units to provide effective and accurate surface timing between blast holes and/or rows of blast holes in surface and underground blasting designs.
NONEL EZTL must be transported, stored, handled and used in conformity with all federal, state, provincial and local laws and regulation.
For maximum shelf life (3 years), NONEL EZTL must be stored in a cool, dry, well ventilated magazine. Explosive inventory should be rotated. Avoid using new materials before the old. For recommended good practices in transporting, storing, handling and using this product, see the booklet “Prevention of Accidents in the Use of Explosive Materials” packed inside each case and the Safety Library Publications of the Institute of Makers of Explosives
| Length | Case Type | Quantity / Case | |
| m | |||
| 4.2 | D | 160 | |
| 6 | D | 140 | |
| 7.8 | D | 120 | |
| Case Dimensions | |||
| Detpak (D) | 44 x 22 x 25 cm | ||
Length rounded to nearest one-half meter.
Case weight varies by length & delay; see case label for exact weight.
For detailed application recommendations, ALWAYS request a copy of Dyno Nobel’s Product Manual: NONEL® and PRIMACORD® from your Dyno Nobel representative.
- ALWAYS be sure that the shock tube(s) are securely inserted, one at a time, into the plastic EZ connector. The head of the connector block should rise to accept the tube, and return to a closed position with an audible click.
- ALWAYS ensure that the individual shock tubes remain aligned side by side in the EZ connector channel and do not cross over one another during insertion.
- ALWAYS protect the plastic EZ connector and all shock tube leads from impact or damage. Use care when placing blasting mats and cover material on top of the blasting circuit. The EZ connector contains a detonator and is subject to detonation caused by abuse such as impact. Shock tube which has been cut, ruptured or damaged may cause misfires.
- NEVER use NONEL EZTL detonators with detonating cord. The low strength surface detonator will not initiate detonating cord.
- NEVER attempt to disassemble the delay detonator from the EZ connector block or use the detonator without the connector.
- NEVER place more than 6 shock tube leads into an EZ connector block, misfires may result.
- NEVER tie-in NONEL EZTL units until all blast holes have been primed, loaded, stemmed and the blast site has been cleared.
Nonelectric Blast Initiation System
NONEL® nonelectric delay detonator EZ DET® units consist of a length of orange shock tube with a surface detonator attached to one end and an in-hole, High Strength, detonator on the other.
MORE ABOUT THIS PRODUCT
Nonelectric Long Period Delay Detonator
NONEL® nonelectric delay detonator LP units consist of a length of yellow shock tube with a High Strength detonator attached to one end and the other end sealed.
MORE ABOUT THIS PRODUCT
Nonelectric Millisecond Delay Detonator
NONEL® nonelectric delay detonator MS 1.1B units consist of a length of orange shock tube with a High Strength detonator attached to one end and the other end sealed.
MORE ABOUT THIS PRODUCT
